The new type provides a reactor and an induction melting furnace, including an upper yoke, a lower yoke, a number of iron cores and sleeves respectively

The coils on the iron core are arranged in parallel with each other. Each iron core includes two end faces. The upper yoke and the lower yoke are respectively wound by a piece of soft magnet. After winding, the upper yoke and the lower yoke are adjacent to each other. The one end surface of the iron core is located in the end surface of the upper yoke and the other end surface of the iron core is located in the end surface of the lower yoke. An insulating plate is provided between the upper yoke and the iron cores, and between the lower yoke and the iron cores. The upper yoke and the lower yoke are fixedly connected to the iron core through a fastener. Change the physical structure of the yoke, so that the magnetic flux passing through the yoke increases without causing magnetic leakage, improves the magnetic permeability of the yoke, and also improves the utilization rate of electrical energy, so as not to waste the electrical energy in the coil, so It will not cause the iron core to heat and cause damage to the reactor.

http://www.songdaokeji.com/plus/list.php?tid=49

http://www.songdaokeji.com/plus/list.php?tid=22

http://www.songdaokeji.com