Green energy 2 t induction melting furnace is an induction furnace 2 tons IF frequency power supply by the 1200KW, 2 with 2 tons of steel or aluminum shell induction melting furnace , steel induction melting furnace with a yoke mounted. Depending on the tilting furnace, users are required to choose either a hydraulic tilting furnace or a mechanical tilting furnace. Optional ordinary 6-pulse rectifier transformer or 12-pulse rectifier transformer, optional complete water cooling system.
Device model GWT-2 / 2000 | Technical indicators (12-pulse enhanced configuration) | Technical indicators (standard configuration) | Technical indicators (12-pulse enhanced configuration) | |
Equipment rated power | 1200KW | 1000KW | 1200KW | |
Phase voltage | 3 * 950V | 3 * 660V | 3 * 950V | |
Electric furnace rated voltage | 1600V | 1600V | 1600V | |
Rated Capacity | 2T | 2T | 2T | |
Rated temperature | 1600 ℃ | 1600 ℃ | 1600 ℃ | |
Single set price | ||||
Complete configuration list: | Fast IF Power | set | set | set |
Compensation capacitor cabinet | One set (12 capacitors) | One set (8 capacitors) | One set (12 capacitors) | |
Furnace (furnace shell Φ1350, induction coil copper tube 30 * 50 * 4) | Ertai | Ertai | Furnace with steel shell mechanism (including yoke) | |
Reducer | Ertai | Ertai | Hydraulic system | |
Water-cooled cable | Four | Two | Four | |
Crucible film | One | One | One | |
Manual information | One | One | One | |
Equipment introduction:
1. The power supply uses a parallel resonant circuit, the control circuit is fully integrated, and the starting power supply uses zero voltage soft start. Very convenient operation, stable and reliable, long trouble-free time, convenient maintenance and low maintenance cost.
2. The power supply has many functions such as over-voltage, over-current, phase loss, under-voltage, under-water pressure, cooling water temperature over-limit alarm protection and so on.
3. Stable operation under appropriate power, fast melting speed and high production efficiency.
4. Three-phase full-bridge rectification is adopted, the high-order harmonics are small, and there is no interference to the power grid. At the same time, the transformer does not generate heat and the losses are extremely low.
5. When the power supply is working, it saves energy, saves water, is small in size, light in weight, safe to use and widely used.
Heating characteristics:
1. The melting process is stable and the casting has high mechanical strength;
2, less oxidation loss, can achieve non-oxidative melting, reduce melting loss;
3. The molten iron itself has an electromagnetic stirring effect, and the metal composition is uniform, which can smelt a variety of processing chips and small scraps, reducing costs;
4. Reduce environmental pollution;
5, high power density, fast melting speed, easy to start melting;
6. The operation is flexible and convenient, and the frequency can be selected;
7, small construction costs;
8. Superb coil design, high-quality thick-walled copper tube, through the reasonable selection of the inter-turn distance of the induction coil, the conversion efficiency of the induction coil is high, the resistance is small, and more energy can be used for melting and heating. Damage occurs due to arcing and expansion forces.
Technical support phone: 15038554363