Induction melting furnace is one of the products of scientific and technological progress . Since its appearance, it has been active in the foundry industry with good performance and reliable operation. However, although the price of the induction melting furnace market is mostly transparent, it varies widely. Today, I will take stock of the factors that affect the price of induction melting furnaces for everyone.
1. Different mechanical components: Different
mechanical components are one of the factors that affect the price of induction melting furnaces. Different components have different performances, different processes, and different materials. Of course, the prices must be different. The parts that generally affect the price of induction melting furnaces are:
1 , SCR
Thyristor is one of the more important components on the power supply equipment of induction melting furnace. Generally speaking, the thyristor materials produced by various manufacturers are basically the same. The price difference mainly exists in quality fluctuations. Large-scale manufacturers' products Relatively small fluctuations in quality. As a result, its price fluctuates, but not much.
2. There is a certain gap in the price of the furnace shell and the
furnace shell, because the difference in the furnace shell can directly affect the heat transfer speed, etc., from the general price of the steel furnace shell, stainless steel furnace shell, aluminum furnace shell and so on. Times or so.
3. The price difference between copper bars and copper pipes, bronze medals and copper pipes, as long as they exist in the material. The type of copper, the purity of copper, etc. are all factors that affect the price difference of copper tubes and pipes, and also indirectly become one of the factors affecting the price of induction melting furnaces.
4. Chassis:
Chassis is the price difference among components of induction melting furnace. Because there are so many parts in the case, the quality of each part is good or bad, and the cost difference of the solid case is several times or even dozens of times.
5. The price difference between capacitors and
capacitors is not in itself, most of them are due to the difference in the number of configurations, and the price difference is small, only a thousand to several thousand costs.
6 , DC
reactor The gap between DC reactors is generally reflected in the size of the power of the intermediate frequency power supply, the difference is generally between one and two thousand yuan.
7. The price difference between power distribution cabinets and
power distribution cabinets is around several thousand yuan. The main difference is that the power distribution cabinets of regular large factories are generally equipped with automatic switches, while low-cost equipment does not have such a configuration.
8. There is not much difference in the price of capacitor cabinets
. Generally, low-cost equipment needs to solve the problem of capacitor placement and fixing.
9. The price difference of water pipe clamps
is not large, and it is also the price difference caused by different materials. Better to use stainless steel clips. And low-cost equipment may be equipped with ordinary iron wire.
10. Other small mechanical components:
There are also some small mechanical component differences, such as resistance, plastic wires, water-cooled cables, water pipes, and transformers, which have more or less affected the overall price of the induction melting furnace.
Second, the gap in technical content:
In addition to the differences in mechanical components, technical content is also a factor affecting the price of induction melting furnaces. Electric furnaces produced by some large factories have invested a lot of manpower and material resources in technology. The advanced level of its equipment will be reflected in many aspects such as smelting speed, power consumption, operation complexity and failure rate. Advanced equipment definitely has more humane settings in all aspects. Of course, the price is also due to Xiaochang's low-cost equipment.
Differences in service commitments
The difference in service commitment can also affect the price of induction melting furnaces. Equipment produced by regular induction melting furnace manufacturers requires repeated static inspections and dynamic commissioning before leaving the factory. And in general, we can provide customers with at least half a year or one year warranty period. During this period, any quality problems of machinery and equipment can be dispatched by staff to carry out debugging and maintenance. These require labor costs, and generally low-cost equipment. produce. Most of them are engaged in production by individuals or a few people, and they may not have the conditions for general pre-sale commissioning. There is no extra staff to service, to debug, and to guarantee the repair of after-sales failures. In contrast, the labor costs incurred may also affect the price of the induction melting furnace.
Fourth, the quality is good or bad
For example, thyristors are much cheaper to install on iron than on epoxy bakelite, but there is a gap in quality. This shows that the quality can also affect the overall price of the induction melting furnace. Different manufacturers and different installation processes result in different quality and different prices.
The above are the factors that affect the price of induction melting furnaces. It can be seen that "one price, one product" is not a false statement. As a large-scale casting and forging equipment, the induction melting furnace must not be greedy for cheap. Failures do not waste time, but also affect efficiency, resulting in more losses than gains. To purchase a high-quality induction melting furnace, you also need to consider a regular manufacturer such as Luoyang Electric Furnace Chief, perfect service, and reliable equipment quality, which is your best choice.
Related references:
induction melting furnace price