Some standards that are suitable for the working environment of the induction melting furnace are arranged for everyone. If the environment exceeds the standard, it will affect the working efficiency of the induction melting furnace, which will seriously cause a series of failure problems in the induction melting furnace.　　

Induction melting furnaces have become an indispensable and important forging equipment in the foundry industry. Many businesses have already learned about the various advantages of induction melting furnaces and started induction melting furnaces for their own workshops. However, few people know that In the process of using the induction melting furnace, the temperature and humidity of the environment will also affect it. As a company focusing on the production and development of induction melting furnaces, today I will share with you the working environments suitable for induction melting furnaces. .

1. The working environment temperature of the equipment should be in the range of +5 ℃ ~ 40 ℃. 

2. The relative humidity of the surrounding environment shall not exceed 90% ( under the standard of 25 ℃). 

3. The altitude does not exceed 1000 meters. 

4. There should be no conductive dust, explosive gas and corrosive gas that can seriously damage metal and insulation around the furnace body of the induction melting furnace, so as not to cause equipment damage or personal injury. 

5. There is no obvious vibration and bump in the equipment working area. 

6. The fluctuation of three-phase power supply is not more than ± 5% . If the fluctuation is large, it may easily lead to the failure of the induction melting furnace and electric furnace. There is a certain danger. 

7. The temperature of nearby cooling water is between ± 5 ℃ ~ 30 ℃. 

8 , turbidity is not greater than 5 , pH is between 6.5 and 8.5 . 　　

Please make some corresponding protective measures according to the environment of the equipment. For example, if the temperature of the equipment is low, you need to take some anti-freezing measures for the equipment; if there are frequent vibrations in the environment, you need to take some measures to reduce the vibration of the equipment. Secondly, the staff should also pay attention to the environmental impact and take good care to avoid causing injuries to people and gain more than they can afford.