Analysis of automation degree of intermediate frequency melting furnace-songdao induction heating equipment manufacturer
Analysis of automation degree of intermediate frequency melting furnace
Author:admin time:2019-09-14 11:18

Medium frequency melting furnace using computer-controlled system a higher degree of automation. High-power IF melting furnace shorter melting period, overheating rate is high only the use of computer control system in order to play the potential of the device and to provide effective protection and plant operators. At present , the large-scale intermediate frequency melting furnace has been equipped with a relatively complete computer-aided monitoring and control system Its main functions include:

(1) When the molten iron in the furnace reaches the pre-programmed temperature, it is guaranteed to automatically reduce the furnace power ;

(2) monitoring, calculating and controlling the temperature of the molten iron ;

(3) providing an automatic sintering procedure for the new furnace lining ;

(4) Determine the amount of Si and other added elements that meet the requirements for molten iron ;

(5) has an automatic cold start device.

  The melt management system provides diagnostic information and a variety of information about the power supply and furnace operation through an easy-to-read display. If the non-normal state of the alarm system startup melting management system will provide the problem and the failure information will be stored for troubleshooting may be connected to a printer and print retention. By melting management system obtain a variety of diagnostic information and operates a number of other functions.


TEL
15038554363 18037961302