”
1. If the induction melting furnace of the parallel line, I choose the equipment of any manufacturer, I agree with the parallel line induction melting furnace. As long as the process is good and the technology is excellent, it is a pity that it is now the world of induction melting furnace. (Nokia mobile phone is good, but now no one buys it).
2, there must be a use case, the current network can do more than 100 manufacturers of induction melting furnace, and the real domestic can do more than 10 manufacturers of induction melting furnace. If the equipment manufacturer is not notified, immediately go to the equipment manufacturer to see the original contract signed by the company and other customers, and then check with the manufacturer to determine that the equipment is produced by the company. (Prevent false contracts or OEM equipment).
3. Because the induction melting furnace is a voltage resonance, electrical technology and process wiring are capacitive impedances, and wiring is important. Have years of manufacturing experience. There must be a technical agreement. The intermediate frequency power supply technology protocol must be accurate to components, copper platoons and even screws. The furnace technology agreement should be accurate to the thickness of the copper tube of the furnace ring, the number of diameters, and even the thickness of the steel plate of the furnace. The technical agreement is the only standard for pre-acceptance. It is impossible to change the technical program into two words. If the manufacturing company can't find a specific technical configuration agreement within two hours, it proves that the company has not done an induction melting furnace.