1 , depending on the circumstances existing equipment we recommend to retain the original 1000KW metal melting furnace ;             

2 , the increase of 750KW ( . 1 ) gold melting furnace is placed in the original 1000KW metal melting furnace foregoing; and original equipment components normalizing, quenching production line;             

3 , the newly added 750KW ( . 1 ) gold melting furnace mainly heated before the Curie point, heating to 500 deg.] C, such heating can take full advantage of the capabilities of the device, the heating efficiency is very high;             

4 , the original 1000KW gold melting furnace is designed according to the Curie point, if the shifting transformation is placed in front of the 750KW (1) gold melting furnace , then the original gold melting furnace will all need to be re-made;             

5 , now 1000KW gold melting furnace will bear the heating of 500 ° C to 930 ° C and the original design is the same;             

6 , the newly added 750KW ( 2 ) gold melting furnace main bear tempering steel; if changing different metal melting furnace can normalizing process;             

7 , tempering gold melting furnace and collected online slots may be interchangeable;             

8 , the first set of metal melting furnace body 750KW (1), we three are arranged between the two rollers track gold melting furnace body of the furnace length ≤800MM;             

9 , the second set of metal melting furnace body 750KW (2), we three are arranged between the two rollers track gold melting furnace body, the length of each furnace section ≤800MM;             

10 , quenching and tempering sensors are divided into three groups according to the workpiece size, each group of 2 , according to the workpiece size is divided as follows: φ 133- φ 196 , φ 197- φ 260 , φ 261- φ 325 . The length of the inductor is about 800 mm , the furnace lining is knotted, the fire resistance temperature can reach 1760 °C, and the waterway adopts quick-change joint. In order to adapt to different specifications of heating billet, the sensor center can be adjusted by electric worm worm lifter, fully satisfying the same The sensor is adapted to the requirements of several specifications for heating steel pipes.       

11 , the normalizing, quenching line outlet end, is provided a spray device for quenching steel is quenched , the quenched steel pipe in the transfer roller is completed into the tempering line,        

12 , the upper and lower adjustment of the gold melting furnace and the quenching liquid spray system adopts electric adjustment mode;