What are the advantages of an intermediate frequency furnace closed cooling tower?
When it comes to intermediate frequency furnaces, everyone is no stranger. The intermediate frequency furnace is the main equipment in the foundry industry. Its stability, reliability and safety are the guarantee of the normal and stable operation of the production line in the foundry industry. However, in the use of the intermediate frequency furnace, there is another supporting equipment that has a significant impact on it, but little is known, that is, the closed cooling tower.
A cooling tower is a heat dissipation device that uses water as a circulating coolant. It is divided into a closed cooling tower and an open cooling tower according to whether the cooling circulating water is in direct contact with the air. In the past, most manufacturers used open cooling towers, but with the popularity of closed cooling towers, they have gradually replaced traditional open cooling towers. So what are the advantages of an intermediate frequency furnace closed cooling tower? Today I will talk to you.
1.Achieving a totally closed inner road
First of all, compared with the traditional open cooling tower, the closed cooling tower is equipped with and realizes a fully closed internal circuit. Since then, the waste of water resources and water pollution have been greatly avoided. And it basically eliminates the threats caused by corrosion and scaling to user equipment, and is especially suitable for enterprises and regions that have strict requirements on industrial water quality and water consumption.
2. Equipped with direct water supply system
The closed cooling tower body carries a self-water supply system, and its installation and relocation are no longer dependent on external pools, and the operation is very convenient. It only includes simple removal, installation and circuit connection of cooling pipes.
3.Automated electrical control is installed
Automatic electrical control enables the closed cooling tower to adjust the air volume and spray volume according to the change of ambient temperature, to achieve high efficiency and energy saving in the cooling process. At the same time, cooling tower electrical control facilities can be installed at various places in the factory to implement remote control functions according to customer requirements to achieve automatic synchronization with user equipment.
4.Manual automatic setting of key operating parameters
Manual and automatic setting of key operating parameters such as cooling water level, inlet and outlet temperature, and audible and optical alarms eliminate the need for frequent manual monitoring to ensure the stability of the cooling process and the cooling effect.