4.8m steel pipe intermediate frequency induction heating internal anti-corrosion equipment

Pearl River Delta Water Resources Allocation Project (Steel Pipe Internal Anticorrosion)

Intermediate frequency induction heating inner epoxy powder spraying equipment configuration:

1. Technical parameters of intermediate frequency heating power supply KGPS-1500KW/0.5KHZ

2. Stiffening ring temperature compensation system IGBT-60KW IGBT-120KW technical parameters

3. Technical parameters of closed-loop cooling tower ZXZ-120T

4. Cantilever mechanism

5. Spraying system

6. Roller rack system

Use a plane induction heating coil to heat the inner wall steel pipe. The heating temperature can be adjusted according to the production speed, the thickness of the pipe wall, and the desired coating gelation and curing time. It is generally controlled at 180~250°C, preferably 230°C. Specific adjustments are made according to the different powder curing characteristics of different powder products and the advice of powder manufacturers. Specific consultation telephone: 15038554363