KGPS-1T-3 type induction melting furnace detailed configuration list

　　 KGPS-1T-3 induction melting furnace, compared with other types of 1T electric furnaces, can save 80-100 degrees per ton of steel melting (power consumption can be as low as 520 degrees per ton of molten steel).

1. Electric cabinet:

1. Rated phase-in voltage: 700V, intermediate frequency output voltage 1300V, DC current: (maximum) 1000A, power (maximum): 1000KW

2. KK Thyristor 1000A/2000V 8 pcs

3. KP SCR 1000A/2500V 6 pcs

4. Air switch 2000A

5. Installed copper bar 80mm X 6mm

6, Reactor (copper pipe diameter 15mm, wall thickness 1.5mm coil, 12), a balance reactor

6. Intelligent system

2. Capacitor cabinet:

Capacitor 2000KF /1200V 6 sets, 360KF/1200V 1 set

Three, stove

Reducer: 531

Furnace shell: diameter 1230 mm high 1390 mm.

Induction coil: Copper tube 25mm X 30mm X 3mm, inner diameter 660mm, 25 circles.

Features:

1. Intelligent system, fast protection speed, durable thyristor, good starting performance, stable work and convenient operation.

2. Using large copper busbars to save electricity.

3. Using a 2-ton electric furnace structure, the bottom heat is small, the bottom is durable, not easy to wear, and the bottom loss is small; using a booster circuit, the voltage at both ends of the electric furnace can reach 2600V (2 times the output voltage of the electric cabinet), Water cables and induction coils have low loss; 700V phase-in voltage, reactors, installed copper bars, and phase-in cables have low loss.