Detailed configuration list of KGPS-2T-1 induction melting furnace

1. Electric cabinet:

1. Rated phase-in voltage: 700V, intermediate frequency output voltage 1350V, DC current (maximum): 1800A, power (maximum): 1500KW

2. KK SCR 1800A/2000V 8 pcs

3. KP SCR 1800A/2500V 6 pcs

4. Reactor (copper pipe diameter 16mm, wall thickness 1.5mm coil)

5. Constant power control system

2. Capacitor cabinet:

Capacitor 2000KF /1200V 8 sets

Three, stove

Reducer: 531

Furnace shell: diameter 1230 mm high 1350 mm.

Induction coil: Copper tube 30 mm X 45 mm X 3.5 mm, inner diameter 750 mm, 15 circles.

Features:

Commonly used type, fast protection speed, good starting performance, stable work and low price.

Detailed configuration list of KGPS-2T-2 induction melting furnace

1. Electric cabinet:

1. Rated phase-in voltage: 800V, intermediate frequency output voltage 1350V, DC current: 2000A, power: 1800KW

2. KK SCR 2000A/1600V 8 pcs

3. KP SCR 2000A/1600V 6 pcs

4. Air switch 2500A

5. Installed copper bar 100mm X 4mm

6. Reactor (copper pipe diameter 16mm, wall thickness 1.5mm coil, 8 pieces)

6. Intelligent system

2. Capacitor cabinet:

Capacitor 2000KF /1200V 10 units

Three, stove

Reducer: 531

Furnace shell: diameter 1330 mm high 1380 mm.

Induction coil: copper tube 25 mm X 40 mm X 3.5 mm inner diameter 800 mm 20 circles.

Features:

1. Intelligent system, fast protection speed, durable thyristor, good starting performance, stable work and convenient operation.

2. Adopting large copper busbars to install the machine, saving electricity; using booster circuit, the voltage at both ends of the electric furnace can reach 1800V (twice the output voltage of the electric cabinet), water cable, induction coil loss is small, and electricity saving.