The three-ton one-to-two induction melting furnace (2017 new type) mainly includes a rectifier transformer, an intermediate frequency power supply, two sets of series inverters, two steel shell furnace bodies, a closed-loop cooling water system, and a computer-assisted smelting management system. The computer-aided smelting management system can not only display real-time data and information of power supply operation, but also display the operating status and information of the entire system. It also has automatic oven, cold furnace startup, fault diagnosis, fault information display and storage, and operation information display. , System status display and other functions.

A series resonance dual output power supply with two electric furnaces can work at the same time (commonly known as one to two), that is, the output power can be arbitrarily distributed between the two furnace bodies, and the two furnace bodies can be powered at the same time, one insulation , A smelt.  

The power cabinet and the furnace body share a closed-circuit circulating water system, including closed-circuit cooling towers, heat exchangers, etc. All the water-cooling system pipes are non-ferrous metals and stainless steel, and there are no rusty iron parts.

The rectifier transformer uses a high voltage to reduce the input voltage suitable for the intermediate frequency power supply, the primary voltage is 10KV, and the secondary uses DY11, d0 wiring 12-pulse rectification form. 

3 tons one to two induction melting furnace main technical parameter configuration 

Because the intermediate frequency induction heating furnace is non-standard equipment, the user's requirements determine the specific configuration of the equipment. The device configuration can be modified more appropriately according to user requirements.