First, the main purpose of 1T parallel intermediate frequency furnace
1T parallel IF melting furnace is mainly applied to steel, iron, copper, aluminum and alloys, having a high melting efficiency, energy-saving effect, a uniform metal composition, burning small, quick temperature rise, easy to control temperature, etc., suitable for all melting metals.
Second, 1T parallel intermediate frequency furnace consists of:
800kw parallel intermediate frequency power supply - steel shell furnace body - water cooled cable - remote operation console - ZXZ-80 T closed loop cooling tower.
Third, 1T parallel intermediate frequency furnace price
The price of the 1T parallel intermediate frequency furnace is calculated according to the power of the intermediate frequency power supply and the volume of the furnace body. Different configuration prices vary. This price is for reference only. Contact us will have a very low price, please consult the specific price. Firstfurnace@gmail.com
Device name | Total price (yuan) |
1T parallel intermediate frequency furnace | ¥ 235000 |
1T parallel intermediate frequency furnace item price
Item name | Specification model |
800kw parallel intermediate frequency power supply | KGPS- 800kw / 1 T |
Steel shell body | GW- 1 T |
Water cooled cable | LHSD- 40 0 square |
Leakage alarm system | LB T -1 |
Remote console | H T -YK |
Fourth, 1T parallel intermediate frequency furnace power supply , tonnage , power consumption selection method .
SDCL - 8 00 kw | Aluminum shell body | Steel shell body |
Parallel intermediate frequency power supply | 800 kw | 800 kw |
Phase voltage | 3*660V | 3 *660V |
Rated voltage | 3000V | 3000V |
Melting rate | About 1.1 T / H | About 1.3 T / H |
Rated Capacity | 1 T | 1 T |
Rated temperature | 1800 ° C | 1800 ° C |
Rectified form | 3 phase | 3 phase |
Power factor | ≥0.95 | ≥0.95 |
Tilting method: | Optional reducer | Hydraulic |
Power Specifications | KGPS-1/ 800 | KGPS-1/ 800 |
Compensation capacitor cabinet | set | set |
stove | Aluminum shell furnace | Steel shell |
Inclined furnace | Reducer | Hydraulic |
Water cooled cable | Two | Two |
Decidua | One | One |
Five, 1T parallel intermediate frequency furnace circuit diagram :
Six, the advantages of 1T parallel intermediate frequency furnace :
1. Due to the characteristics of the resonant circuit, the variable frequency power supply with parallel resonance has good protection when the circuit is short-circuited. Because the reactor device with buffer function installed in the intermediate circuit can effectively suppress the rapid rise of current, it can be reliably turned off when the circuit fails.
2 , resonant frequency conversion environmental source and inverter side loss is very small (because the large current only works in the resonant circuit) and accurate coil voltage control (to make full use of the highest power of the capacitor group)
3 , the technology is mature, the performance of the whole machine is stable and reliable, and has a competitive advantage.
4 , easy to operate, easy to use
5 , the maintenance speed is fast, the maintenance difficulty and maintenance costs are low!
6 , the price is relatively cheap.