Explain in detail 6 tips to buy an induction melting furnace

1. Selection technique of copper bar for induction melting furnace

If the connecting copper bar is the original color of copper, don't choose it if it is, just change one. Regular electrical equipment copper parts need to be plated white, silver plating is better, tin or nickel can also be plated. Because the copper watch is easy to oxidize, and it will become more and more severe, the contact resistance will become larger and larger, and the power consumption will gradually increase.

2. Selection of aluminum shell capacitors for induction melting furnaces:

Aluminum case capacitors are generally divided into three types: ordinary type, standard type, and reinforced type. Generally, the appearance standard and weight can be seen. The reinforced type is better but the price is higher.

3. Selection techniques of circuit breaker (air-open) of induction melting furnace

Circuit breaker, a good circuit breaker can save the life of the equipment in a critical moment. There is a wooden handle on the right for the selected type-DW10 or DW16, or you can consult an electrician. The price of this air-open protection function is several times lower. When the equipment is normal, the circuit breaker is only a switch, as if it is not important. In the event of an accident, this is the last pass of protection.

4.Copper

Copper material directly affects the function and power consumption of the induction melting furnace. The thickness of the copper pipe is more than 5mm

5, reactor selection skills of induction melting furnace

The reactor depends on the overall size, including the size of the copper tube, the thickness of the copper tube, the size of the iron core, and the silicon steel sheet. Silicon steel sheets generally cost 10,000 yuan / ton, and good tens of thousands of yuan / ton. Reactors are worth a few thousand yuan a little smaller. They are easy to use when small, but they consume more power and affect protection.

6, radiator

Radiator is one of the more commonly used accessories on induction melting furnace equipment. It is easy to find that the triangular cover at both ends is cut-off. The normal thickness should be about 5mm, otherwise it is difficult to maintain the rated pressure.

To sum up the above six points, when purchasing an induction melting furnace, in addition to paying attention to the price information, you should also pay attention to these accessories. Do not make small mistakes, resulting in huge bills and energy consumption in the later period. Professional steel bar quenching and tempering equipment, steel bar heating furnace, billet heating furnace, steel plate heat treatment equipment, steel bar heat treatment equipment and other manufacturers of induction heating treatment furnaces, with a number of patented technologies, successfully reduced the energy consumption of induction melting furnaces, specific details can be Click URL: http://www.songdaokeji.com/plus/list.php?tid=22