Induction heating furnaces have a high status in the industry and are important equipment for production, processing and heating. We are a professional manufacturer of induction heating furnaces and other equipment. Everyone knows that industrial production is accompanied by the generation of heat and the discharge of pollutants, which is not conducive to the sustainable development of society. It is important to improve the recovery rate of waste heat in the production and use of induction heating furnaces.

Everyone has some misunderstandings about the purchase of induction heating furnace equipment. In order to enable everyone to purchase high-quality equipment, the most common misunderstandings are listed below:

Misunderstanding 1: only look at the power, not the frequency of heat penetration in standard parts, fasteners, etc., when the diameter of the heated workpiece is greater than Φ60mm, you should choose an intermediate frequency equipment (induction heating furnace,). Will cause the surface of the workpiece to “melt” and the internal heating will not reach the temperature. Not only the equipment efficiency is greatly reduced, but also the life of the mold will be reduced or even the mold will be damaged. The cost will increase, but the reason is unknown.

Misunderstanding 2: Look at the model and not the power. For example, the single-phase input current 120A and the input power 120kw of the induction heating furnace and induction heating furnace equipment are collectively referred to as 120 machines, so that the real power is only 80kw after buying back. It is cheap, but it is a loss in secret.

Misunderstanding 3: Only look at the output, not the input. Ignore the efficiency and power consumption of the induction heating furnace equipment. After buying back the equipment, it is found that it is an "electric tiger", which makes it affordable and unaffordable. For example, the same is 80 machines, but one is 80KVA input power, and the other is 80KW output power, but the efficiency of the equipment is very different. Although it can also complete the heating requirements, the power consumption is too large for users to lose. The input power of the equipment with an output of 80KW competes up to 120kw.