Selection method of 1 ton induction melting furnace dust collector

According to the actual situation at the site and the data provided by Party A, one set of 2 sets of induction melting furnaces in a workshop choose one dust removal device; the air volume of one set of 1 ton induction melting furnace is about 8000m3 / h, and three sets of induction melting furnaces use two sets of air volume at the same time. : 8000m3 / h × 2 = 16000m3 / h. The total air volume required for processing is 16000m3 / h. The model selected is DMC-250 pulse dust collector. Filtering wind speed V = 1.1m / min. In the second workshop, three sets of induction melting furnaces use one dust removal device; one set of 1 ton induction melting furnace has an air volume of about 8000m3 / h, and three sets of induction melting furnaces use two sets of air volume at the same time: about 8000m3 / h × 5 = 40000m3 / h. The total air volume required for processing is 40,000m3 / h. The type selected is PPC96-7 pulse dust collector. Filtering wind speed V = 1.1m / min.

According to the demand side, the production process of the induction melting furnace is provided so that the temperature of smoke and dust is ≤300 degrees.

Technical parameters of two 1-ton induction melting furnace bag filters:

Air volume m3 / h 16000 m3 / h

Handling materials Smoke from the induction melting furnace process

Inlet flue gas temperature

Bag Dust Collector Model DMC-250

Filtration area m2 250

Filtering wind speed m / min 1.1

Filter bag size mm φ133 × 2500

Material of filter material

Number of dust bag (strip) 250

Solenoid pulse valve specification YM-1.5 ”

Filtering method

Dust removal method

Ash discharge method