Induction melting furnace a device that propels up the foundry industry. With its fast heating speed, uniform and high-precision temperature control and low energy consumption and cost, it has stood at the top of the casting equipment chain for many years, attracting countless foundries to buy first. The market for induction melting furnaces is rather confusing. What should be paid attention to when purchasing induction melting furnaces? Today, Xiaobian is addressing this issue and suggesting some suggestions for purchasing induction melting furnacesfor your reference.

1, check the copper row surface　　Copper platoons, also known as copper busbars or copper busbars, are long conductors made of the same material and generally rectangular or chamfered (rounded) rectangles. For use in induction melting furnace circuitry, the current transport functions and is connected to electrical equipment. During the purchase of the induction melting furnace, be sure to observe the color of the copper row to see if it has been plated. If it is the original color of copper, it should be cautious, because the regular electrical equipment will be whitened or better silver plated because the copper material is more oxidized. There are also tinned copper bars. If the copper oxide is oxidized, the contact resistance is increased, resulting in an increase in power consumption. Manufacturers have saved costs, but let buyers who are willing to pay for their greed in the long-term use.

2, observe the aluminum shell capacitor model　
　　The importance of capacitors need not be said. In addition to checking the aluminum shell, observing the quality of the aluminum shell capacitor is also an important issue when purchasing an induction melting furnace. Common aluminum shell capacitors are classified into normal type, standard type, and reinforced type. Under normal circumstances, you can distinguish between good and bad standards, weights, etc. You can also ask what type of aluminum shell capacitors are used on the merchant equipment, and then refer to the current equipment quotation standards.

3, check whether the circuit breaker is suitable
　　The normal operation of the circuit breaker may be just a switch, it is not a big use, but once the equipment circuit fails, it will be an important gateway to protect the equipment. If the quality of the circuit breaker is not good, the consequences will be unimaginable. Therefore, the quality of the circuit breaker is also a critical criterion when purchasing an induction melting furnace. The method of distinguishing the good or bad of the circuit breaker is relatively simple. Generally, there is a wooden handle on the right side of the circuit breaker, which is the model standard of the circuit breaker, generally DW10 and DW16. After viewing, the electrician can be asked whether the circuit breaker equipped with the equipment is suitable.

4, observe the thickness of other copper products
　　In addition to the copper row, the induction melting furnace has many copper pipe products inside and outside. After checking the above three items, don't forget to check the good and bad thickness of the copper tube products of the equipment. Generally, the good copper tube products can effectively reduce the power consumption and improve the efficiency. The standard for distinguishing the copper tube is the thickness of the copper tube copper. Under normal circumstances, the thin copper tube has a central depression at the bend, and the thick copper tube does not show such a phenomenon.

5, distinguish the reactor is good or bad　
　　Reactors, also called inductors, are also important in many accessories for induction melting furnaces. The price difference of reactors is large, and a small level will be several thousand yuan, and the quality of reactors can be distinguished by looking at the overall size, copper tube core size, and thickness. In general, the thicker the copper tube, the better, and the thinner the silicon steel sheet, the better.　

6, pay attention to whether the radiator cut corners
　　SCR radiators, as the name implies, play an important role in heat dissipation in induction melting furnaces. Generally, the radiator is an iron product. In contrast, the value is relatively low, but the role is important. Compare the shape of the radiator to see its shape. If the ends are triangular, it will cut corners, and the normal thickness should be about 5mm .

　　The above is some of the precautions for the purchase of induction melting furnaces shared by Xiaobian. Induction melting furnaces are used as large-scale casting equipment. If accidents occur due to quality problems, the consequences are unimaginable. Therefore, we must carefully choose when purchasing, carefully check and select the products of regular reliable manufacturers.