2020 new induction melting furnace all-weather uninterrupted monitoring system installation and use method
Take time to monitor the thickness of the lining of the induction melting furnace, the lining of the furnace, the leakage of the coil, the resistance of the copper row to the ground, and even the quality of the cooling of the coil, and the current state of the display can be adapted to different tonnages in the digital display. Induction melting furnace lining material: Different lining materials have different insulation resistance. When the insulation resistance is too low, the coil leakage current to the earth increases. On the one hand, a large amount of electric energy leaks, causing unnecessary waste; on the other hand, it is easy to cause the coil to the ground. The ignition causes the coil of the induction melting furnace to be damaged, so it is not safe to thicken the lining, and the lining with high insulation resistance is truly safe;
The lining detection system is monitored 24 hours a day, 7 days a week.
The detector is required to install a grounding probe at the bottom of the furnace to ensure reliable grounding of the molten steel and to reliably contact the probe with the ground; and reliably connect one end of the high-voltage isolation device with the effective part of the coil;
User-friendly interface design for easy operation and maintenance:
After the first operation of the system is set, there is no need to repeat the setting. If the induction melting furnace lining is thin, the water content is too high, the coil cooling water quality is poor, the coil has a little water leakage, and the copper row to ground resistance is too low, the digital display The meter can display the current status in time. When the set upper limit is reached, the detector outputs a fault and automatically stops the induction melting furnace system to ensure safe and stable operation of the system;
http://www.songdaokeji.com/plus/list.php?tid=22
