787 IF power control board basic parameters-songdao induction heating equipment manufacturer
787 IF power control board basic parameters
Author:admin time:2019-09-16 15:16

   intermediate frequency power supply

 1. Board installation size: 205 × 297 ; fixed hole distance: 195 × 287

 2. Synchronous voltage 380 1250V (change the current limiting resistance parameter for different synchronous voltage), photoelectric isolation input.

 3. The whole board interface is consistent with the old constant power board (except the 18V power supply interface), which is convenient for the replacement of the old constant power board. 

 4. The whole board has only 33 outlet ports, which is convenient to install. 

 5. Rectification phase shift range 150o 

 6. Inverter working frequency range 300~2kHz 2000 10kHz 

 7. AC input voltage 18V 18V 

 8. Starting performance: 100 % (normal load).

 9. Repeated start: times / 
 10. Constant current and constant voltage performance: static adjustment rate is 100 %, dynamic adjustment rate is 95 %.

 11. Buffering time: 5S .

 12. Symmetry suppression ability >6us .

 13. Intelligent "RE" port negative logic (on-the-ground reset reset; ground-open inverter start).

 14. Given voltage 15V positive logic.

 15. On-board overvoltage, overcurrent indication, voltage limit, current limit indication, frequency sweep indication, intermediate frequency establishment indication, system indication, ±15v indication, restart indication, equipment operation and board working status at a glance.

 16. With constant power, constant current and constant voltage function.

 17. It has the functions of sweeping and constant current repetition.

 18. With frequency band switching function, adapt to various frequency ranges: medium frequency board 300 2Kz , high frequency board 2KHz 10KHz .
 19. Has a 100 % buffer start function. (The power potentiometer can be turned on at any position).

 20. Inverter symmetry adjustment function can improve the inverter efficiency by to 10 %.

 21. Inverter output pulse amplitude >8v , pulse width >60us , pulse leading edge <1us .

 22. Overcurrent and overvoltage alarm dual output ( 220V-5A )   

image.png

TEL
15038554363 18037961302