Round steel quenching and tempering production line circulating cooling system-songdao induction heating equipment manufacturer
Round steel quenching and tempering production line circulating cooling system
Author:admin time:2019-08-28 09:22

1. The cooling system uses a feng shui cooler to cool the entire equipment. The model is FBT-3C .

2 , the water temperature of the medium frequency cabinet and capacitor does not exceed 50 °C ; the temperature of the sensor outlet water does not exceed 55 °C ;

3 , cooling circuit water connection is reliable, the mark is obvious, can withstand 0.5Mpa pressure without leakage, when the components and components can be replaced, the corresponding valve can be closed to block the waterway.

image.png

4 , quenching liquid cooling system:

4.1 Quenching liquid cooling system is cooled by Feng Shui cooler, model is FL-3000

4.2 The system has no loss of medium, recycling, and the composition ratio is stable;

4.3 The medium is not affected by the environment and does not pollute the environment;

4.4 Good temperature control accuracy, can improve the quality of quenching;

4.5 Multi-stage segmentation filtration, with adjustable water pressure at all levels;

Features of the fluid cooler :

1 FL series closed cooling tower is stylish and beautiful, with compact internal structure and reasonable layout;

2The outer shell plate is made of 2mm thick hot-dip galvanized sheet (optional stainless steel plate), which is welded, folded and punched by CNC machine tool and assembled without weld seam. The size is accurate and flat;

3 cooler (main part) is made of international standard T 2 deacidified copper tube, with few solder joints and welded with silver electrode;

4 PVC high-efficiency dehydrator can make the water drift rate less than 0.001% , making it possible to place the equipment in water-sensitive areas;

5 PVC high efficiency style grille, small wind resistance, reduce the energy consumption of the fan and there will be no splashing of spray water, the sun will not reach the inside of the sink, effectively preventing the growth of algae;

6 The pumping station is composed of a main water pump and a backup water pump. When the main water pump fails, the standby water pump can be started immediately, making continuous water supply possible. In the event of a power outage, the gasoline engine emergency pump can be selected for the user to complete the continuous cooling of the induction coil;

7 fan blades are aluminum alloy, motor is aluminum shell three anti-motor, domestic famous brand;

The 8 circulating water tank is made of 304 stainless steel plate and has an imported liquid level alarm;

⑨ closed cooling tower inlet is provided with pressure display, the power supply in the furnace is also provided with a pressure inlet at the display (installation site), the differential pressure read by the pressure drop of water, so as to achieve effective cooling, in order to ensure that the device Safe water flow range;

10. The closed cooling tower has a water temperature display and alarm function at the water outlet, and can control the temperature of the inlet and outlet water through the digital temperature controller to control the opening and closing of the spray system. The closed cooling tower is continuously and safely and efficiently cooled by the intermediate frequency power supply and the furnace body within a predetermined water temperature range.

Selection:

The total power of the device, heat conversion has been calculated , for the electrical part of the furnace section and the cooling system is the selection


TEL
15038554363 18037961302