”
KGPS-3T energy-saving induction melting furnace detailed configuration list
A, electric cabinet:
1, rated phase voltage: 1250V, intermediate frequency output voltage 1900V, DC current: (maximum) 2000A, power (maximum): 2000KW
2, KK thyristor 1000A/2500V 24
3, KP thyristor 2000A/3500V 6
4, air switch 3500A
5, installed copper row 100 mm X 6 mm
6, reactor (copper tube 20mmX20mm, wall thickness 2mm coil, 12), a balanced reactor
6, intelligent system
B, KGPS-3T energy-saving induction melting furnace capacitor cabinet:
Capacitor 2000KF / 1900V 18 sets
C, KGPS-3T energy-saving induction melting furnace body
Reducer: 531 reducer
Furnace shell: diameter 1500 mm high 1700 mm.
Induction ring Copper tube 30 mm X 60 mm X 4 mm Inner diameter 950 mm 19 laps.
Features:
1. Intelligent system, fast protection, durable thyristor, good starting performance, stable operation and convenient operation.
2, using a large copper rowing machine, saving electricity.
3, special heat-dissipating ring at the bottom of the furnace, the bottom of the furnace is durable, it is not easy to wear the furnace, and the loss at the bottom of the furnace is small; using the booster circuit, the voltage at both ends of the electric furnace can reach 3200V (two times the output voltage of the electric cabinet), the water cable and the induction coil are lost. Small; 1000V phase-in voltage, reactor, installed copper row, phase-in-line cable loss; 24 1000A/2500V KK thyristors, three sets of KK thyristors in parallel, low power consumption, and KK controllable during maintenance The cost of silicon can be reduced by a factor of three.