”
1T induction melting furnace steel shell structure description
1T induction melting furnace: The power supply part is composed of intermediate frequency power supply cabinet, capacitor cabinet, water-cooled cable, operation console and connecting copper row; mechanical part consists of furnace body, fixed frame, water and electricity introduction system, hydraulic device, operation table and furnace lining device And so on.
A, 1T induction melting furnace body:
The hob adopts a frame plus steel barrel structure, which has the advantages of simple structure, high strength and easy installation. It is equipped with a yoke, an inductor, a lining material, and the like. The furnace body is tilted by the sliding bearing seat and the shaft. The tilting of the furnace body is driven by two hydraulic cylinders. It can be operated at any angle through the multi-way reversing valve on the operating table, and the limit rotation angle is 95 °. The inductor is made of copper tube and consists of a working coil and a water-cooled coil. The water-cooled coil plays a role in balancing the sidewall temperature of the lining and improving the life of the lining. The strip yoke on the outside of the inductor is formed by stacking silicon steel sheets to restrain the divergence of magnetic lines of force and to act as a tight coil. The bolt is pressed in the radial direction of the yoke. In this way, the inductor, the yoke, and the hob form a solid whole.
B, 1T induction melting furnace holder:
The fixing frame is a triangular frame structure, which is welded by steel and plate. The fixing frame is integrated with the foundation through anchor bolts.
In addition to the full static load of the furnace, the fixed frame must withstand all dynamic loads when the furnace is rotated and the furnace lining is ejected.
C, 1T induction melting furnace body water and electricity introduction system mode :
The current of the inductor of the 1T induction melting furnace is input through a water-cooled cable. There are cooling water in the copper tube and the water-cooled cable of the inductor. An electric contact pressure gauge is installed on the main inlet pipe of the furnace to monitor the water pressure and the water pressure is low. The bimetal thermometer is installed on each water branch of the induction coil. For cooling water over temperature alarm. Cooling water temperature rose by GB10067.1-88 basis: inlet temperature of less than 35 [deg.] C, the temperature rise is no greater than 20 is [deg.] C .
D, 1T induction melting furnace hydraulic system:
Three furnaces are equipped with one hydraulic station and two operating stations. It is used to control the tilting of the furnace body, and each furnace can be started separately.
F, hydraulic device:
The working medium of the hydraulic device is anti-wear hydraulic oil. For the working principle, see “Hydraulic Schematic”.
E , console:
The operation console is mainly composed of multi-channel manual control reversing valve, oil pump start, stop button, indicator light and box body. The tilting of the furnace body can be achieved by manipulating the valve handle.
reference:
A, the method of selecting "induction melting furnace"
B, the price of induction melting furnace
C, induction melting furnace installation method
D, induction melting furnace safe use, safe operation method
E, induction melting furnace installation layout of FIG.